Our in-house test checks the health and output of your salt or mineral chlorinator cell under load. We connect the cell to a bench tester to measure volts and amps, confirm polarity reversal, and check the controller is delivering power as it should. We inspect the plates and housing for scale, cracks or corrosion, and confirm cable and union condition. If we find heavy scale, we advise how to clean it safely. You receive simple results and clear next steps, whether that is a clean, a controller adjustment, or a replacement cell if output is below spec.

In most cases, bringing the cell is enough. Please rinse it with fresh water before travel and keep the unions attached if they are part of the seal. If you suspect a controller issue, bring the control box too so we can check supply, fuses and terminals. If you are unsure, a quick call to the store can confirm what to bring. Our goal is to test what matters, give you a clear answer on the spot, and get you back to a clean and safe pool with as little fuss as possible.

Testing fees are modest and reflect the time needed to set up and record results. Prices can vary by system type and condition. We always provide upfront pricing in store before we start. If the test shows the cell is fine, we will advise the most cost effective fix, such as cleaning, changing run time, or adjusting salt or mineral levels. If the cell needs replacing, we will recommend suitable options and explain the total cost so you can make a simple, confident choice that fits your budget.

Most bench tests take a short time once we have the cell. If we need to soak and clean heavy scale first, it can take longer. Booking helps us plan, but you can also drop the cell in and we will aim to test it as soon as we can. We keep the process simple. Bring the cell, we test it safely, we show you the results, and we tell you what to do next. This saves repeat trips and keeps your pool on track, especially before hot weather or school holidays.

Look for low or zero chlorine even with a high output setting, frequent algae, cloudy water, or a strong odour. Check for build up of white scale on the plates, or a control box that shows error lights. If your pump run time is correct and your salt or mineral levels are within range but chlorine stays low, testing is the smart next step. Our test confirms if the cell is producing as it should. If it is not, we advise whether a safe clean or a replacement is the right move, based on the test results and age of the cell.

Yes. We test standard saltwater cells and mineral systems that use blends like magnesium and potassium. The process is similar. We confirm output, polarity change and plate condition, then check that your levels match the manufacturer range for that system. Mineral pools still rely on correct salinity to make chlorine. We explain any changes needed in plain terms so you can keep the benefits you like, such as softer feeling water, while staying within the right range for steady chlorine production and healthy, clear water.

If the cell does not reach expected output, we first check for scale and safe cleaning options. If cleaning will not restore output, we will recommend a replacement. We match new cells to your controller where possible and explain any adapter needs. We also review pump run time, stabiliser level and water balance so a new cell performs well from day one. You get a simple quote and clear advice. The aim is to fix the cause, not just the symptom, so you get stable chlorine and fewer headaches in future.

Our test is non invasive and follows safe handling. We do not modify the cell or controller during testing. If your product is under warranty, bring the purchase details and we can guide you on the correct process for the brand. Many makers require proof of correct salinity and water balance for claims. Our report helps with that by showing the cell output and any issues found. We always aim to protect your warranty and will advise if a brand needs the item to be assessed through its authorised channel.

A quick check once a year is a good habit, and before summer is ideal. Test sooner if you see low chlorine or heavy scale. Regular testing helps you catch small issues early, like slow output decline or a failing polarity change. This lets you clean or adjust settings before the pool turns cloudy or green. You will also extend the life of the cell by keeping salt or mineral levels in range, maintaining correct stabiliser, and running the pump for the right number of hours for your pool size and bather load.

Yes. We stock and source a wide range of replacement cells for popular brands. We will help you choose a cell that fits your controller and pool size. If you need installation support, we can assist with fitting, sealing and start up checks, or arrange a technician visit if required. We also explain how to set output, pump run time and correct salinity so the new cell performs well from day one. This gives you a simple, end to end solution from test to clean water.

Testing itself does not raise chlorine, but it shows you exactly why levels are low. It may be scale on the plates, low salt or mineral level, short pump run time, high bather load, or high chlorine demand from unbalanced water. Once we know the cause, the fix is simple. Clean the cell safely, adjust water balance, run the pump longer, or replace a worn cell. Acting on the test results prevents waste, saves money on chemicals, and gets your pool back to stable, safe chlorine levels quickly.